Product Lines
Product Types
Product Applications
Markets
Selected Filters
-
Bitumastic 300 M
Features:
- Excellent chemical, corrosion and abrasion resistance
- High-build, 16-24 mils (400-610 microns) in a single coat (up to 35 mils with force curing)
- Compatible with controlled cathodic protection
- Suitable for use in exposures as referenced in the following specifications:
- Corp of Engineers C-200, C200a
- AWWA C-210 for exterior
- SSPC-Paint 16
- Steel Tank Institute Corrosion Control System STI-P3
- Approved MPI #35
Description:
Renowned high build coal tar epoxy polyamide for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.
-
Carboglas 1601 SG
Features:
- Outstanding marine exposure resistance (atmospheric, tidal, subsea)
- Excellent resistance to both organic and mineral acids
- Excellent abrasion and impact resistance
- Excellent resistance to bleach solutions and free chlorine
- Outstanding long-term protection
Description:
This extremely durable and chemically resistant cladding utilizes a multi-step curing process that incorporates chemically-fused glass flake reinforcing in a highly cross-linked polyester matrix. The resultant layer is an extremely durable barrier against a variety of exposures including marine, fresh water, salt water, both mineral and organic acids, bleach solutions, and free chlorine. The multi-layer glass-flake reinforcement greatly impedes the penetration of water and other corrosives making this system extremely long performing.
-
Carboguard 151-2
Features:
- Solventless, high performance protection
- Low-to-no odor
- Easy to apply by standard equipment
- Excellent chemical resistance
- Fast cure
- Tough abrasion resistant film
- Excellent flexibility
- Excellent corrosion protection
- Impact resistant
- Hi-build application
- Internal film reinforcement (chopped strandmat)
- Ideal for upgrading older crude storage facilities, which have been severely corroded
- Has excellent resistance to crude oil, water and brine
Description:
Very tough, hard coating developed for glass-reinforced application up to 1/8” (0.32 cm) by two component airless spray, roller or squeegee. Excellent wetting properties minimize air entrapment frequently encountered during filled application with glass-reinforced materials. Carboguard 151-2 has sufficient flexibility to withstand the expansion and contraction effects encountered in large storage tanks. Component A is pigmented blue and Component B is pigmented yellow. When Carboguard 151-2 is properly mixed and applied, a uniform green color is obtained.
-
Carboguard 1341
Features:
- Universal primer and tie coat
- Excellent adhesion to concrete and various Pyrocrete products
- Low stress
- Compatible with a variety of topcoats
- Low odour
- Provides 1-2 mils film build
Description:
A two-pack penetrating primer/sealer for contentious surfaces. It is highly flexible with good chemical and solvent resistance and accepts a variety of topcoats. Meets ASTM C-309 Type I specification for moisture retention of concrete.
-
Carboguard 193 Primer
Features:
- Excellent corrosion protection
- High build film
- Excellent adhesion
- Very good abrasion resistance
- Good all-round chemical resistance
Description:
An economical, lead-free, high build maintenance-coating primer. Cures to hard, tough film with excellent sub-film corrosion resistance. Has excellent physical properties and good all-round chemical resistance. Carboguard 193 Primer has excellent adhesion and better tolerance of field application variables than other types of coatings.
-
Carboguard 193 Primer S
Features:
- Excellent corrosion protection
- High build film
- Excellent adhesion
- Very good abrasion resistance
- Good all-round chemical resistance
Description:
An economical, lead-free, high build maintenance-coating primer. Cures to hard, tough film with excellent sub-film corrosion resistance. Has excellent physical properties and good all-round chemical resistance. Carboline 193 Primer S has excellent adhesion and better tolerance of field application variables than other types of coatings.
-
Carboguard 193 TL
Features:
- As a blast holding primer for systems being immersed in water.
- As a lining for hot water cylinders operating at temperatures of 75°C to 90°C in continual or partial immersion.
- As a primer on concrete substrates.
- As a single coat direct to metal MIO finish.
- Not recommended for immersion service in acids, alkalies or solvents.
Description:
Fast drying primer / finish with excellent water resistance.
-
Carboguard 195
Features:
Description:
High build epoxy filler for sealing and surfacing irregular concrete and metal surfaces.
-
Carboguard 60
Features:
- Laboratory qualified for multiple ISO 12944 atmospheric-corrosivity categories
- Low odor and low VOC
- Available in a variety of rapid tint colors*
- Attractive medium sheen for tank exteriors
- Good chemical resistance
- Used as a primer, intermediate, or finish coat
- Fast cure & dry times
- Can be applied over power tool cleaned surfaces
- VOC compliant to current AIM regulations
- Good abrasion resistance
- Approved MPI #108
Description:
Carboguard 60 is a high solids, versatile, abrasion resistant, chemical resistant, and corrosion resistant coating. It can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. This product has excellent wetting properties giving it the capability of going over marginally prepared substrates. It is ideal for maintenance and fabrication shop applications. An optional Glass Flake (GF) additive or micaceous iron oxide (MiO) additive can be purchased separately and may be used to enhance film strength for more abusive applications for severe marine or heavy industrial uses. Consult Technical Service for suitability as a lining or other exposures.
-
Carboguard 635
Features:
- Low temperature cure (20°F)
- Excellent corrosion protection
- Excellent application characteristics
- Fast recoat times
- Moisture tolerance during application
- Continues to cure underwater
- Extended recoat window for atmospheric exposures (6 months for most topcoats)
- Meets IMO Performance Standard for Protective Coatings MSC.215(82): 2006 for sea water ballast tanks
Description:
An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Can be used direct to metal as a corrosion resistant primer, an intermediate coating over itself and many other primers, and can be used as a finish coat. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in fresh or salt water (marine) exposures. Meets IMO performance for ballast tanks for marine vessels.
-
Carboguard 690
Features:
- High solids, low VOC
- High build (16 mils)
- Low temperature cure (20°F)
- Excellent moisture tolerance during application
- Continues to cure underwater
- Fast cure response
- Suitable for use in USDA inspected facilities
Description:
High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Can be used on structural steel, piping, tankage, and equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects; and is ideal for coatings under insulation up to 300°F (149°C).
-
Carboguard 690 GF
Features:
- High solids, low VOC
- High build (20+ mils)
- Low temperature cure (20°F)
- Excellent moisture tolerance during application
- Continues to cure underwater
- Fast cure response
- Excellent physical and barrier properties
Description:
High performance, glass-flake filled, cold cure epoxy having excellent film strength and resistance to water, salt water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Glass flake reinforcement enhances film strength, impact resistance and barrier properties. Can be used on a variety of surfaces including structural steel, piping, pilings, ships, offshore structures and other equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects.
-
Carboguard 703
Features:
- High film build and edge protection
- Excellent resistance to corrosion and abrasion
- May be used in conjunction with cathodic protection
- Application by airless spray equipment (plural component acceptable but not required)
- Meets most VOC (Volatile Organic Content) regulations
Description:
Ultra high build, airless-applied, solvent-free coating for use on steel and concrete substrates. Widely used as a splash zone coating on marine installations, tank lining in petroleum services and for protection of buried pipelines. It has extremely good impact and abrasion resistance and is suitable for variety of heavy industrial applications.
-
Carboguard 703 GF
Features:
- High film build and edge protection
- Excellent resistance to corrosion and abrasion
- May be used in conjunction with cathodic protection
- Application by airless spray equipment (plural component acceptable but not required)
- Meets most VOC (Volatile Organic Content) regulations
Description:
Ultra high build, airless-applied, solventless coating for use on steel and concrete substrates. Widely used as a splash zone coating on marine installations, tank lining in petroleum services and for protection of buried pipelines. It has extremely good impact and abrasion resistance and is suitable for variety of heavy industrial applications. Carboguard 703 GF (Glass Flake) is specially formulated for higher abrasion resistance while retaining the temperature, chemical and other physical properties of Carboguard 703.
-
Carboguard 838
Features:
- Self priming
- VOC compliant to current AIM regulations
- Complies with BS 5493 standards for MIO (80%)
- Excellent film build and edge protection
- Good abrasion resistance
- Excellent surface tolerance
Description:
High performance, high solid epoxy with excellent corrosion protection used either as primer or as an intermediate coat over steel and zinc primers Can be topcoated with a broad variety of high performance finish coats
-
Carboguard 890
Features:
- Excellent chemical resistance
- Surface tolerant characteristics
- Conventional and low-temperature versions
- Self-priming and primer/finish capabilities
- Very good abrasion resistance
- VOC compliant to current AIM regulations
- Suitable for use in USDA inspected facilities
- Intermediate coat for AWWA D102 Outside System #6 and #7
- Approved MPI #98
Description:
Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions. An optional micaceous iron oxide additive (MIO Filler) can be purchased separately and may be used per the Product Data Sheet to enhance corrosion protection and film strength for more aggressive service such as severe marine or heavy industrial uses.
-
Carboguard 890 GF
Features:
- Excellent chemical resistance
- Surface tolerant characteristics for less severe applications
- Low-temperature version: 890 LT GF
- Self-priming and primer/finish capabilities
- Excellent abrasion resistance & hardness
- VOC compliant to current AIM regulations
- Non-skid service with optional fillers
Description:
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the water line) in marine applications where these resistance qualities are desired.
-
Carboguard 890 GF2
Features:
- Convenient two-component mix
- Excellent chemical resistance
- Surface tolerant characteristics for less severe applications
- Self-priming and primer/finish capabilities
- Excellent abrasion resistance & hardness
- VOC compliant to current AIM regulations
Description:
A two-component, glass reinforced epoxy coating. 890 GF2 is chemical resistant and has a wide range of uses in industrial environments. Its glass reinforcement allows for excellent internal film strength, hardness, impact, and abrasion resistance. Most commonly, it is used in severe service (above or below the water line) in marine applications where these resistance qualities are desired.
-
Carboguard 891 VOC
Features:
- Meets the FDA requirements for 21CFR 175.300 for direct food contact
- Meets the requirements of AWWA C210
- Ultra High solids; Low VOC and HAPs
- Handles deionized water up to 150°F (66°C)
- Ultra low VOC (67 g/l)
- Good chemical resistance
- Excellent thermal shock resistance
- Good abrasion resistance
Description:
Ultra high solids epoxy that is designed as a liner for water, demineralized water, wastewater and many other services. It is widely used as a tank lining for steel and concrete tanks. Product is self-priming and is normally applied in two coats. Formulated for application at conventional builds (4 to 6 mils per coat) as well as high builds (10 mils per coat).
-
Carboguard 893
Features:
- Excellent corrosion protection
- Excellent film build and edge protection
- Used as a primer or an intermediate coating
- Good abrasion resistance
- Cures down to 40°F (4°C)
- VOC compliant to current AIM regulations
Description:
High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over steel and inorganic zinc primers. Can be topcoated with a broad variety of high performance finish coats.
-
Carboguard 893 SG
Features:
- Ready to apply after mixing; no sweat-in time or thinning required.
- Economical fit for use epoxy
- Available in a variety of rapid tint colors
- Attractive low sheen for tank exteriors
- Used as a primer, intermediate, or finish coat
- Power tool cleaned surfaces acceptable
- Optional low temperature (LT) cure Part B
- VOC compliant to current AIM regulations
Description:
Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel and zinc primers. Carboline glass flake additive may be added to improve performance including internal strength, hardness, impact, and abrasion resistance. May be topcoated with itself, or a broad variety of high performance finish coats. Product also has surface tolerant properties. Use optional (LT) cure for low temperature cure down to 35°F (1.7°C).
-
Carboguard 893 SG MIO
Features:
- Ready to apply after mixing; no sweat-in time or thinning required.
- Economical fit for use epoxy
- Used as a primer or intermediate coat
- Can be applied over power tool cleaned surfaces
- Micaceous iron oxide (MiO Filler) for additional barrier properties and corrosion resistance: MiO is purchased separately
- Optional low temperature (LT) cure Part B
- VOC compliant to current AIM regulations
Description:
Versatile corrosion resistant coating with zinc phosphate corrosion inhibitor. Contains additional filler reinforcement (micaceous iron oxide) for enhanced barrier resistant properties. Used either as a primer or intermediate coat over steel, other epoxies or inorganic zinc primers. May be topcoated with a broad variety of high performance finish coats. Has surface tolerant properties. Has optional (LT) cure for 35°F cure capability.
-
Carbomastic 15
Features:
- Unique formulation with lamellar aluminum flakes for exceptional barrier protection
- Excellent performance over minimal surface preparation of steel substrates
- Suitable as a topcoat for most tightly adhered existing coatings
- Excellent choice for field touch-up of zinc-rich primers and galvanized steel
- Available in a low temperature cure version (Carbomastic 15 FC)
- Suitable for use under insulation on hot surfaces operating up to 300 °F (150 °C)
- VOC compliant to current AIM regulations
Description:
Aluminum pigmented, low-stress, high-solids mastic with a proven field history. This unique formulation incorporates lamellar aluminum pigment for superior barrier protection. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.
-
Carbomastic 615
Features:
- High solids, low VOC
- Low temperature cure
- Excellent wetting properties
- Excellent surface tolerance
- Excellent moisture tolerance (application)
- Continues to cure underwater
- Fast cure response
- Suitable for immersion service in fresh or salt water after 60 minutes cure @ 75°F
Description:
High performance epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. It contains an inert flake reinforcement (micaceous iron oxide) to enhance film strength and performance. This product is ideal for industrial or heavy duty marine environments for the protection of steel against salt laden environments.
-
Carbothane 133 HB
Features:
- Outstanding performance properties in both mild and aggressive environments
- High build; suitable for many two-coat systems
- Suitable for application direct to inorganic zincs
- Application by spray, brush or roller
- Indefinite recoatability
- VOC compliant to current AIM regulations
Description:
High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.
-
Carbothane 134 HG
Features:
- High solids, low VOC content
- Excellent weatherability
- Exceeds SSPC Paint 36 specification for a Level 3 urethane
- Available in all Carboline colors including metallic-pigmented colors
- Excellent flow characteristics allow for application by spray or roller
- Superior impact and abrasion resistance
- Indefinite recoatability
- VOC compliant to current AIM regulations
- Meets the requirements of AWWA D 102 Outside Coating System (OCS) 5 & 6
- Suitable for use in USDA inspected facilities
- Meets the performance requirements of MIL-PRF-85285E Type II, Class H Polyurethane
- Meets the performance requirements of UFGS 09 97 13.27 Polyurethane Topcoat
Description:
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.
-
Carbothane 134 HG Aluminum
Features:
- High solids, low VOC content
- Excellent weatherability
- Available in metallic-pigmented colors
- Excellent flow characteristics allow for application by spray or roller
- Superior impact and abrasion resistance
- Indefinite recoatability
- VOC compliant to current AIM regulations
Description:
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.
-
Carbothane 137 HS
Features:
Description:
Carbothane 137 HS is a fast-drying, high build, two component polyurethane coating which exhibits excellent dry times and handling characteristics required by Original Equipment Manufacturers. Has excellent UV resistance and good corrosion resistance in direct to metal applications for C1 to C3 environments, over primers for C4 to C5 environments.
-
Carbotherm 3300
Features:
- Excellent thin-film insulation
- Unique formula provides superior coverage during application
- Protects personnel from hot surfaces
- Multi-purpose interior/exterior coating
- Insulation provides anti-condensation properties
- Easy to use
- Zero VOC; Low odor
- May be applied to hot surfaces
Description:
Carbotherm 3300 is a ceramic blend insulative composite coating formulated in a high temperature resistant acrylic binder. It is ideally suited as a protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate sweating of pipes or other operating equipment.
-
Carbotherm 551
Features:
- Excellent thin-film insulation
- Unique epoxy formula outperforms acrylic-based materials
- Tougher and more durable than acrylic coatings
- Higher chemical resistance than acrylic coatings
- Topcoats are optional
- Protects personnel from hot surfaces
- Ideal for industrial/aggressive applications
- Insulation provides anti-condensation properties
- Acceptable for use in USDA facilities
- High film build per coat; fewer coats
- Low VOC; low odor
- May be applied to hot surfaces
Description:
Carbotherm 551 is a unique insulative composite coating formulated in a high temperature resistant epoxy binder. Unlike acrylic-based insulative materials it has superior toughness, hardness, impact resistance, chemical resistance and permeation resistance. It is therefore more suitable for industrial applications or other physically demanding environments. It is an ideal protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate condensation of pipes or other operating equipment. Its superior application properties of higher film build per coat and fewer coats offers savings and quicker return to service. Because it bonds directly to the surface (unlike standard insulation materials) it minimizes water entry and the effect of corrosion under insulation.
-
Carboxane 2000
Features:
- Isocyanate free
- Exceptional weatherability
- Outstanding color and gloss retention
- Exceeds SSPC Coating Specification No. 36 Level 3A
- Excellent corrosion protection
- Meets ISO 12944 C3 High and C4 Medium, one coat applied at 5 to 7 mils DFT
- High build, 3 to 7 mils DFT
- Saves significant time, labor, and money
- Long service life
- VOC compliant
- Excellent durability
- Good flexibility and abrasion resistance
- Long pot life
Description:
Carboxane 2000 is an isocyanate free, ultra-durable coating that provides outstanding color and gloss retention as well as excellent corrosion protection for exterior exposures. When used over a suitable primer (as a two coat system) Carboxane 2000 provides the barrier, corrosion resistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance. This tightly cross-linked film utilizes a UV-resistant siloxane binder resulting in a finish with excellent corrosion protection and weathering performance that far exceeds aliphatic polyurethanes.
-
Carbozinc 11
Features:
- Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
- Rapid cure. Dry to handle in 45 minutes at 60°F (16°C) and 50% relative humidity
- Low temperature cure down to 0°F (-18°C)
- High zinc loading
- Meets FDA requirements
- Zinc supplied meets ASTM D520 (Type II)*
- Meets SSPC Paint 20 Type I, Level 1 for zinc content
- Very good resistance to salting
- May be applied with standard airless or conventional spray equipment
- VOC compliant in many areas
- Approved MPI #19
Description:
Time-tested corrosion resistant coating that provides excellent galvanic corrosion protection to steel in some of the harshest environments. For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide.
-
Carbozinc 858 (3K)
Features:
- Protects steel galvanically
- Outstanding application properties
- Cures at low temperatures down to 35°F(2ºC)
- Tough and abrasion resistant film
- Wide use in severe industrial or marine environments
Description:
A high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in highly corrosive environments including offshore, marine and industrial. This low VOC, HAPs compliant primer has quick cure-to-topcoat characteristics for in-shop applications and quick turnaround capabilities for the field. It has excellent adhesion and undercutting resistance and is outstanding for use as a corrosion resistant primer for a variety of applications.
-
Carbozinc 859
Features:
- Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
- Rapid cure. Dry to recoat in 30 minutes at 75°F (24°C) and 50% relative humidity.
- Complies with SSPC Paint 20 (Type II)
- Low temperature cure down to 35°F (2°C)
- Excellent adhesion
- Protects against undercutting corrosion
- Field proven primer that applies well by spray methods
- Excellent touch-up primer by brush or roll for small areas.
- VOC compliant to current AIM regulations
- Approved for MPI #20
Description:
Low VOC organic zinc epoxy steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 859 has less than 3 lbs/gallon (359.5 g/l) VOC (thinned) and is used extensively in virtually all industrial markets.
-
Carbozinc 8701
Features:
- Excellent application properties
- Tough abrasion resistant film
- Excellent adhesion & undercutting resistance
- Superior corrosion resistance
- Meets VOC (Volatile Organic Content) regulations
- Fast drying for quick recoating
Description:
A two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. This product can be applied by conventional or airless spray. Recommended for Original Equipment Manufacturers where a high performance, highly corrosion resistant zinc primer is desired. Typical applications include marine, offshore drilling equipment, truck trailer chassis, underbodies and related equipment, industrial and off-road machinery, electrical transformers, industrial tanks, vessels, pumps and processing equipment.
-
Phenoline 1205
Features:
- Excellent resistance to ethanol, gasoline, jet fuels and solvents.
- Excellent abrasion resistance.
- Excellent thermal shock resistance (0 to 300° F).
- VOC compliant to current AIM regulations.
- Excellent resistance to deionized or demineralized water up to 203°F (95°C).
- Excellent resistance to crude oil up to 250°F (121°C).
- Excellent for crude oil storage and transportation up to 250° F (121° C)
- Recommended for CS-1,3,4 and SS-1,2,3 systems of NACE SP0198 Standard Practice for coatings to control Corrosion Under Insulation (CUI).
Description:
Glass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement. 1205 exhibits very good acid resistance. Excellent for use as a lining for tanks or pipes in process facilities where hot water or abrasive conditions exist.
-
Phenoline 187 VOC
Features:
- High solids; Low VOC formula
- VOC compliant to current AIM regulations
- Excellent overall chemical resistance
- Excellent for crude-oil storage
- Excellent resistance up to 400°F(204°C)
- Excellent abrasion & thermal shock resistance
- Meets the FDA requirements for 21CFR 175.300 for direct food contact
- Passes EI 1541 jet fuel gum test
- Complies with MIL-PRF-4556F testing
Description:
High solids epoxy lining with exceptional chemical resistance. Primarily as a tank lining, it is recommended for storage of crude oil (180°F/82°C), demineralized water (150°F/65°C), tap water (200°F/93°C) food and beverage industries, and water and wastewater exposures. Is excellent as a protective coating under insulation, operating at (400°F/204°C). Outstanding resistance to wet/dry cycling conditions at these elevated temperatures.
-
Phenoline 311 Primer
Features:
- Low temperature cure (20°F)
- Excellent blast-hold protection
- Suitable for use over damp concrete
- Excellent application characteristics
- Fast recoat times
- Moisture tolerance during application
- Meets VOC restrictions
- Low HAP’s content
- Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
Description:
A tank lining holding primer that has a variety of attributes including low-temperature cure, fast recoat times, moisture tolerance during application and cure, and excellent blast-hold protection. Phenoline 311 Primer is often used with thick film lining systems as a holding primer (maintain blast cleaning) and is suitable for both new tanks and relines. It exhibits excellent surface wetting characteristics and quick cure for handling. It contains high levels of inert flake reinforcement. Excellent for use as a bonding primer for linings when damp concrete or masonry substrates are encountered.
-
Phenoline 379
Features:
- Single coat application reduces labor costs
- Ultra-high build capabilities provides a voidfree film and excellent edge protection
- Resistant to inorganic and organic acids, caustics and most solvents
- Can be mat reinforced where exposure conditions dictate
- Application by airless spray equipment (plural component acceptable but not required)
- VOC compliant to current AIM regulations
Description:
Single-coat, airless-applied, ultra-high build coating for use on steel and concrete substrates subject to aggressive chemical exposure. Phenoline 379 has the same application and physical properties of Phenoline 309 but provides enhanced chemical protection for a broader and more concentrated range of acids.
-
Phenoline 385
Features:
- High solids; Low VOC formula
- VOC compliant to current AIM regulations
- Excellent for crude-oil storage
- Excellent resistance to petroleum products
- Excellent abrasion resistance
- Excellent thermal shock resistance
- Complies with MIL-PRF-4556F testing
- Fully compliant with the EI1541 performance requirements for Aviation Fuel Handling Systems (commonly known as the Jet Fuel Gum Test)
Description:
High performance, high solids, epoxy lining that is recommended for a variety of petroleum storage products including 180°F (82°C) crude oil, demineralized water 150°F (65°C), crude/water mixtures, fuel oil, jet fuel, biodiesel, and gasoline. It is also a good choice for wastewater and water exposures. Product is self-priming and is normally applied in two coats. It is also suitable for food-grade (aqueous) cargos and meets the FDA requirements for 21CFR 175.300 for direct food contact.
-
Phenoline Tank Shield
Features:
- Batch mix formulation, single leg airless spray
- High impact resistance
- Superior adhesion to steel
- Excellent resistance to water and salt water
- Resistance to a broad range of fuels
- Passes EI 1541 requirements for internal protective coating systems used in aviation fuel handling systems, including the jet fuel gum test
- Adheres to API 653 inspection and API 652 guidelines for inspection intervals.
- Resistant to hot water up to 180°F (82°C)
- Excellent abrasion resistance and flexibility
- Can be applied down to 35 °F (2 °C)
- Can be applied as a single or multi-coat system
- Non-blushing with a long recoat window
- Low odor
Description:
This product is a solvent-free, high performance epoxy coating designed as an internal tank, valve and pipe lining for chemical or other commodity storage. It is a unique blend of resins and curing agents that allow batch mixing for ease of application. Plural component spray equipment is not required. The product is blush resistant and is typically applied at film thicknesses of 20 mils (500 microns) or thicker as needed (tank floors). It can handle exposures typically seen in the oil and gas industries; crude oils and fuels. It is resistant to NGL condensates, produced water, brines, industrial process water, waste water, and sewage. Ideal for municipal wastewater and water treatment facilities.
-
Plasite 4301 HT
Features:
- Outstanding resistance to aggressive chemicals
- Suitable for use as a highly chemically resistant lining
- Excellent for splash, spill and film exposures on structural steel
- Glass-flake reinforced film
- High tensile and flexural strength
- High film thickness
Description:
This high performance glass-flake filled coating was designed for application over steel or concrete in extreme chemical exposures. It is resistant to a wide variety of aggressive chemicals, including organic and inorganic acids, most alkalies, and many solvents. It is ideally suited for immersion service as internal steel tank linings, as well as for aggressive chemical splash, spill, and fume exposures on structural steel. Typical uses include steel tank and vat linings, secondary containment, structural steel, process floors, grating, sumps and trenches, scrubbers, and clarifiers.
-
Plasite 4500
Features:
- High impact resistance
- Superior adhesion to steel
- Resistance to a broad range of chemicals
- Can be applied as low as 35°F/2°C
- Can be applied as a one-coat 20-60 mil system
- NSF/ANSI 61 compliant for use in potable water tanks, pipes, and valves.*
- Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
- Meets AWWA C210 requirements for use in water supply pipeline and valves
- Passes ASTM G210 - Severe Waste Water Analysis Tests (SWAT)
Description:
PLASITE 4500 is a solvent free, flake-reinforced, high performance epoxy coating designed as an internal tank lining for chemical or other commodity storage. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, many acids and some solvents. Excellent versatility allows for potable water and water treatment immersion service.
-
Plasite 4500 S
Features:
- High impact resistance
- Superior adhesion to steel and concrete
- Resistance to a broad range of chemicals
- Can be applied in a one-coat application up to 60 mils
- Can be sprayed using single component airless equipment
- VOC compliant
- Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
- Certified by UL to meet the drinking water criteria of NSF 61
- Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
Description:
Plasite 4500 S is a 100% solids, flake-filled, premium epoxy coating designed for internal steel and concrete tanks and pipe lining. Suitable for sheet piling, H and pipe pilings in marine immersion and splash zones.
-
Plasite 4550
Features:
- High Impact Resistance
- Superior adhesion to metal substrates and concrete
- Outstanding adhesion to stainless steel, even with low blast profiles
- Well suited to protect alloy steels typically used to wet FGD systems where pitting and crevice corrosion often occur
- Fast cure-to-service; depending upon application can be placed into service within 36 hours
- Minimal blushing characteristics
- Can be applied in temperatures as low as 35 °F (1.7 °C)
- Can be applied as a one-coat system
- Tested and approved for crude oil transportation up to 350 °F (177 °C)
- Superior thermal shock resistance from -40 to 350 °F (-40-177 °C)
- Complies with the API RP 652 definition of a reinforced liner.
Description:
PLASITE 4550 is a 100% solids, reinforced, premium novolac epoxy coating for internal tank lining. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, sour crude oil and 98% sulfuric acid.
-
Plasite 4550 S
Features:
- High impact and thermal shock resistance
- Superior adhesion to steel and concrete
- Resistance to a broad range of chemicals
- Can be applied up to 60 mils in one coat
- Can be sprayed using single component airless equipment
- Passes ASTM G210 - Severe Waste Water Analysis Test (SWAT)
Description:
PLASITE 4550 S is a 100% solids, flake filled, premium novolac epoxy coating designed for internal steel and concrete substrates. It is a two component system consisting of four-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, from a total thickness of 20-60 mils (500-1500 microns) in a single coat application for a variety of applications. This product has been tested and is approved for crude oil storage and transportation up to 350°F (177°C). It has superior thermal shock resistance over the range -40° to 350°F (-40 to 177°C). Typical Uses: Crude oil tankers, chemical storage tanks, wastewater clarifiers, plating vats, oil storage tanks, catwalks, pulp and paper liquor tanks or concrete exposures in wastewater applications.
-
Plasite 7159
Features:
- Easy-to-apply high performance thin film lining
- Protects I high temperature demineralized water immersion - 212°F (100°C)
- Recommended in high pressure three phase service up to 250°F (121°C)
- Can be air dried or force cured for prompt service
Description:
A water-resistant, phenolic epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry.
-
Polyclad 777 Medium-Set
Features:
- Rapid curing to increase through put
- Excellent abrasion resistance
- Superior wetting properties for outstanding adhesion
- Robust 1:1 mix ratio and user friendly application properties
- Can be topcoated by Carbothane aliphatic polyurethanes
- Unlimited build with single multi-pass coats
- Compliant with AWWA C222
Description:
Polyclad 777 Medium Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.
-
Polyclad 777 Snap-Set
Features:
- Rapid curing to increase through put
- Excellent abrasion resistance
- Superior wetting properties for outstanding adhesion
- Robust 1:1 mix ratio and user friendly application properties
- Can be topcoated by Carbothane aliphatic polyurethanes
- Unlimited build with single multi-pass coats
- Compliant with AWWA C222
Description:
Polyclad 777 Snap Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.
-
Pyrocrete 239
Features:
- Combined acoustical and fire protection
- Easily applied by spray or trowel
- Excellent physical properties – hard, durable
- Nonflammable – during or after application
- Asbestos-free – complies with EPA and OSHA regulations
- Chloride and sulfide free – no special priming required
- Non-friable – high impact strength
- Single package – mixed with clean, potable water at the job site
- Investigated for exterior use by Underwriters Laboratories, Inc
- Quality Manufactured – under strict Carboline quality standards
- UL factory inspection service
Description:
A medium density, Portland cement based, cementitious fireproofing that is mixed with clean, potable water onsite before application and spray applied to the substrate. It provides 1-4 hour fire protection for structural steel members and upgrades the fire resistance of existing concrete. It can also be used as a thermal barrier over polyurethane foam. Recommended areas of application include pharmaceutical facilities, pulp and paper mills, nuclear and conventional power plants, factories, warehouses, stadiums, institutional and biomedical facilities and acoustical applications.
-
Pyrocrete 241
Features:
- Over 40 years of proven performance
- Exceptional durability and toughness
- UL 1709 hydrocarbon fire rated up to 4 hours
- Jet fire rated up to 2 hours
- ASTM E119 cellulosic fire rated up to 4 hours
- Cryogenic protection against LNG spills and immersion exposures
- Resistant to 3 bar blast overpressure
- Hose stream resistant
- UL 2431 Category I-A Outdoor Heavy Industrial and Exterior Environmental Purpose
- Tolerant to wide range of climates
- Lightweight – one-fifth the weight of concrete for equal fire protection
- Ideal for onsite and offsite application
- Easy application by spray or trowel
- Nonflammable – during or after application
- Chloride and sulfide free – no special priming required
- Asbestos-free – complies with EPA and OSHA regulations
- Non-friable – high impact strength
Description:
A 55 lb./ft³ (881 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.
-
Pyrocrete 241 HY
Features:
- Cost effective, high yield
- Exceptional durability and toughness
- UL 1709 hydrocarbon fire rated up to 4 hours
- ISO 22899-1 jet fire rated up to 2 hours
- Cryogenic protection against LNG spills and immersion exposures
- Resistant to 3 bar blast overpressure
- Hose stream resistant
- Tolerant to wide range of climates
- Lightweight – one-fifth the weight of concrete for equal fire protection
- Ideal for onsite and offsite application
- Easy application by spray or trowel
- Nonflammable – during or after application
- Chloride and sulfide free – no special priming required
- Asbestos-free – complies with EPA and OSHA regulations
- Non-friable – high impact strength
Description:
A 50 lb./ft³ (800 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.
-
Pyrocrete 40
Features:
- Cost effective fireproofing solution
- Outstanding coverage, high build
- Exceptional durability and toughness
- UL 1709 hydrocarbon fire rated up to 4 hours
- BS 476 hydrocarbon fire rated up to 4 hours
- ISO 22899-1 jet fire rated up to 2 hours
- ASTM E119 cellulosic fire rated up to 4 hours
- Cryogenic protection against LNG spills and immersion exposures
- Resistant to 3 bar blast overpressure
- Hose stream resistant
- Tolerant to wide range of climates
- Lightweight – one-fifth the weight of concrete for equal fire protection
- Easy application by spray or trowel
- Nonflammable – during or after application
- Chloride and sulfide free – no special priming required
- Asbestos-free – complies with EPA and OSHA regulations
- Non-friable – high impact strength
Description:
A minimum 40 lb./ft³ (640 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.
-
Pyrolite 15
Features:
- Durable cementitious formulation
- Noncombustible
- Can be injected with Accelerator A-20 for fast set and increased yield (optional)
- Asbestos-free – complies with EPA and OSHA regulations.
- Mineral Wool free – no airborne fibers.
- Styrene free – no toxic decomposition gases.
- Economical – Maintains project on budget.
- Design flexibility with over 40 UL designs.
Description:
A 15 lbs./ft³ density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours.
-
Pyrolite 22
Features:
- Durable cementitious formulation
- Noncombustible
- Can be injected with Accelerator A-20 for fast set and increased yield (optional)
- Asbestos-free – complies with EPA and OSHA regulations.
- Mineral Wool free – no airborne fibers.
- Styrene free – no toxic decomposition gases.
- Economical – Maintains project on budget.
- Design flexibility with over 40 UL designs.
Description:
A 22 lbs./ft³ density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours.
-
Reactamine 760
Features:
- UL approved for ANSI/NSF Std. 61 potable water*
- Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
- Complies with 21 CFR 175.300 Method D, E, & G and Direct Dry Food Contact
- Complies with Greenbook
- Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
- Cold temperature cure
- Fast cure and walk on time
- Excellent barrier properties, low permeability
- Single-coat application 60 to 125 mils
- Bridges normal shrinkage cracks in concrete
- True monolithic film on steel and concrete
- Encapsulates rivets, bolts, and edges in one coat
- Outstanding abrasion, impact and tear resistance
- Combines polyurethane and polyurea technologies to form a hybrid polyurethane
Description:
Environmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service.
-
Rustbond
Features:
- Universal primer and tie-coat
- Excellent adhesion to SSPC-SP 2 prepared steel, galvanizing, aluminum, stainless steel and copper
- Low stress, highly flexible film
- Extremely high solids
- Low odor
- Contains corrosion inhibitors
- Compatible with a variety of topcoats
- User friendly brush and roller application
- VOC compliant to current AIM regulations
Description:
Rustbond is a cross-linked penetrating primer/sealer with excellent wetting properties. It is highly flexible with good chemical and solvent resistance, and accept a variety of topcoats. Recommended use as primer/sealers for marginally prepared steel and over old coatings. Its excellent wetting properties allows it to penetrate rust and discontinuities in existing coatings and provide a firm anchorage for a variety of topcoats. Its thixotropic character reduces run off, ensuring that the edges of existing coatings are encapsulated thus reducing undercutting and peeling. It may also be used as a tie-coat for coatings that exceed their “recoat window.” Consult Carboline Technical Services Department for specific recommendations.
-
Semstone 110
Features:
- Outstanding wetting properties
- Solvent-free
- Long working time
- Excellent adhesion
- Compatible with a variety of toppings
Description:
Two part epoxy exhibiting superior adhesion to concrete and steel. Used primarily as a primer/sealer for concrete surfaces and top coated with a variety of chemically resistant toppings.
-
Semstone 140
Features:
- Excellent resistance to chemical attack
- Excellent abrasion and impact resistance
- Exceptional thermal shock resistance
- Superior bonding properties
- High cohesive strength
- Low permeability
- Low odor
Description:
High performance lining system designed for concrete. Semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals.
-
Semstone 145
Features:
- Excellent resistance to chemical attack
- Excellent abrasion and impact resistance
- Exceptional thermal shock resistance
- Superior acid resistance
- Superior bonding qualities
- High cohesive strength
- Low permeability
- Low odor
Description:
100% solids, high performance, novolac epoxy lining system designed for concrete. It is a semi-leveling coating and may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals, including 98% sulfuric acid, as well as many organic chemicals and solvents.
-
SEMSTONE 8084
Features:
Description:
SEMSTONE 8084 is a two-part rubberized vinyl ester primer. It is used under SEMSTONE vinyl ester lining systems to impart high adhesion and impact resistance.
-
SOUTHWEST TYPE 5GP
Features:
- Durable cementitious formulation
- Noncombustible
- Can be injected with Accelerator A-20 for fast set and increased yield (optional)
- Asbestos-free – compliant with EPA and OSHA
- Mineral Wool free – no airborne fibers.
- Styrene free – no toxic decomposition gases
- Economical – Maintains project on budget
- Design flexibility with over 100 UL/cUL designs
Description:
A 15 lb./ft³ (240 kg/m³) SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. Southwest Type 5GP is a trademark of the Southwest Fireproofing Products Company.
-
SOUTHWEST TYPE 5MD
Features:
- Durable cementitious formulation
- Noncombustible
- Can be injected with Accelerator A-20 for fast set and increased yield (optional)
- Asbestos-free – compliant with EPA and OSHA
- Mineral Wool free – no airborne fibers
- Styrene free – no toxic decomposition gases
- Design flexibility with over 100 UL/cUL designs
Description:
A medium density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. Southwest Type 5MD is a trademark of the Southwest Fireproofing Products Company.
-
SOUTHWEST TYPE 7GP
Features:
- Damage resistant and permanent
- Noncombustible
- Can be injected with Accelerator A-20 for fast set (optional)
- Moisture resistant
- Asbestos-free – complies with EPA and OSHA regulations
- Mineral Wool free – no airborne fibers
- Styrene free – no toxic decomposition gases
- Economical – Maintains project on budget
- Design flexibility with over 100 UL/cUL designs
Description:
A 22 lb./ft³ (352 kg/m³) density (average) SFRM intended for the fire protection of structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. It was specifically formulated for either unconditioned or conditioned areas such as mechanical rooms, elevator shafts and parking garages.
-
Splash Zone A-788
Features:
- Designed for underwater and other wet applications
- Can be applied up to 2" in thickness
- Self-priming on most surfaces and over most generic types of coatings
- Rapid cure characteristics
- VOC compliant to current AIM regulations
Description:
Solvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces. Has the unique ability to be mixed, applied and cured underwater.
-
Surface Cleaner 3
Features:
- Minimum Toxicity - Waterborne
- Biodegradable
Description:
Cleaning agent used for degreasing and cleaning contaminated surfaces prior to painting. This product is biodegradable and can be used on both painted and unpainted surfaces.
-
Thermaline 450 EP
Features:
- Versatile use from cryogenic to 400°F (204°C) exposures
- Very good flexibility
- Excellent overall chemical resistance
- Very good abrasion resistance
- Easily applied by spray
- Acceptable for use over stainless steels
- High solids, low VOC formula
Description:
A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating continuously up to 400°F, 204°C. It has excellent chemical resistance properties to handle the corrosive effects of wet insulation under thermal cycling conditions. This coating is recommended for NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI) system numbers CS-1, CS-3, CS-4, SS-1, SS-2, and SS-3.
-
Thermaline 4700
Features:
- Resistant to severe thermal shock
- Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
- Provides barrier protection prior to heat curing (full film physical properties occur after heat curing)
Description:
High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1004°F (204°C-540°C) Color stability at maximum temperature will depend on color selected.
-
Thermaline 4700 Aluminum
Features:
- Resistant to severe thermal shock
- Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
- Provides barrier protection prior to heat curing (full film physical properties occur after heat curing)
- Approved MPI #22
Description:
High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1004°F (204°C-540°C) Color stability at maximum temperature will depend on color selected.
-
Thermaline 4900
Features:
- 450°F (232°C) Temperature resistance
- Single-coat application
- Excellent resistance to thermal shock
- Good weathering and color stability
Description:
Air-dried coating available in colors and suitable for 450°F (232°C) high temperature exposures. Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 300°F (149°C) is recommended and will impart added strength and integrity to the coating.
-
Thermaline 4900 Aluminum
Features:
- Temperature resistance up to 525°F (273°C)
- Single-coat application
- Excellent resistance to thermal shock
- Good weathering and color stability
Description:
Air-dried coating available in colors and suitable for high temperature exposures up to 525°F (273°C). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 300°F (149°C) is recommended and will impart added strength and integrity to the coating.
-
Thermaline Heat Shield
Features:
- Unique reinforced but flexible polymer film
- Versatile use from cryogenic to 1200°F (650°C) exposures
- Dries to handle without heat cure (See curing schedule)
- Outstanding barrier properties
- Protects steel from thermal wet cyclic conditions
- Suitable for both shop and field application
- Provides corrosion protection even with ambient temperature cure
- Meets ISO 12944-6 C5-M Medium
- Self priming or apply over Carbozinc 11 primers when uninsulated
- Protects stainless steels from chlorides and stress corrosion cracking
- Very fast recoat times
Description:
This is an extreme performance coating for hot, cryogenic and cycling exposures. Thermaline Heat Shield contains a unique blend of plate-like reinforcing pigments fortified with an inert polymeric matrix. The resulting film provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments. This versatile coating is ideal for all piping, vessels and equipment operating from cryogenic conditions up to 1200°F. It is particularly well suited to prevent corrosion under insulated equipment/piping for both carbon steel substrates and stainless steels. This fortified coating has superior shop handling properties over standard silicone coatings (see Curing). It is recommended for CS-6 and SS-5 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).
-
Thermo-Lag 3000-P
Features:
- Provides a flexible fire protection solution to structural steelwork, process vessels, divisions and electrical raceways for 1 through 4 hours.
- Lowest thickness per fire rating of any competitive epoxy intumescent coating.
- Inherently flexible and durable formulation designed to withstand abrasion, vibration, handling, transportation and erection stresses in any climate.
- Formulated to maintain it’s flexibility, elongation and fire resistive properties throughout its service life regardless of climate.
- Engineered to resist extreme and rapid temperature cycles without cracking or disbondment.
- Extensive outgas testing for controlled cleanroom and sterile environments.
Description:
Thermo-Lag 3000-P is a flexible, two-component epoxy Intumescent Fireproofing coating designed to provide asset integrity from the damaging effects of hydrocarbon fires. Since 1999 Thermo-Lag 3000-P has provided fire protection in the harshest of environments, such as oil, gas, refineries, power, marine, petrochemical, and LNG facilities. Thermo-Lag 3000-P has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A.754(18) for H-0, H-60 & H-120 Divisions, ASTM E84, ASTM E119, ISO 20340, NORSOK M-501 5A Fire and Corrosion Testing, and NFPA 290 (extended to 150 minutes).
-
Thermo-Lag 3000-SP
Features:
- Provides a flexible fire protection solution to structural steelwork, process vessels, divisions and electrical raceways for 1 through 4 hours.
- Lowest thickness per fire rating of any competitive epoxy intumescent coating.
- Inherently flexible and durable formulation designed to withstand abrasion, vibration, handling, transportation and erection stresses in any climate.
- Formulated to maintain it’s flexibility, elongation and fire resistive properties throughout its service life regardless of climate.
- Engineered to resist extreme and rapid temperature cycles without cracking or disbondment.
- Extensive outgas testing for controlled cleanroom and sterile environments.
Description:
Thermo-Lag 3000-SP is a flexible, two-component epoxy Intumescent Fireproofing coating designed to provide asset integrity from the damaging effects of hydrocarbon fires. Since 1999 Thermo-Lag 3000-SP has provided fire protection in the harshest of environments, such as oil, gas, refineries, power, marine, petrochemical, and LNG facilities. Thermo-Lag 3000-SP has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A.754(18) for H-0, H-60 & H-120 Divisions, ASTM E84, ASTM E119, ISO 20340, NORSOK M-501 5A Fire and Corrosion Testing, and NFPA 290 (extended to 150 minutes).
-
Thermo-Lag E100
Features:
- Certified to UL 263 / ASTM E119 / NFPA 251
- Exterior and interior rated
- High quality aesthetic finish
- Does not require reinforcing mesh
- Low thickness requirements
- High build, fast recoat
- Saves application time, lowering installation cost
- Rugged durable material suitable for onsite or offsite applications
- LEED compliant, low VOC
- Extensive outgas testing for controlled cleanroom and sterile environments
Description:
An epoxy intumescent fireproofing for commercial and light industrial applications. It was specifically designed with an advanced formulation to provide 1-3 hour cellulosic fire protection for structural steel beams, I-section columns, tubular columns and pipes without the need for reinforcing mesh. It provides a fast curing, aesthetically pleasing fire protection solution and is rated for both exterior and interior applications.
-
Thermo-Lag E100 S
Features:
- Certified to UL 263 / ASTM E119 / NFPA 251
- Exterior and interior rated
- High quality aesthetic finish
- Does not require reinforcing mesh
- Low thickness requirements
- High build, fast recoat
- Saves application time, lowering installation cost
- Rugged durable material suitable for onsite or offsite applications
- LEED compliant, low VOC
- Extensive outgas testing for controlled cleanroom and sterile environments
Description:
An epoxy intumescent fireproofing for commercial and light industrial applications. It was specifically designed with an advanced formulation to provide 1-3 hour cellulosic fire protection for structural steel beams, I-section columns, tubular columns and pipes without the need for reinforcing mesh. It provides a fast curing, aesthetically pleasing fire protection solution and is rated for both exterior and interior applications.
