Products


Product Lines

Product Types

Product Applications

Markets

Clear All

Selected Filters


  • Additive 47

    Features:

    Description:

    Styrene


  • Bitumastic 300 M

    Features:

    • Excellent chemical, corrosion and abrasion resistance
    • High-build, 16-24 mils (400-610 microns) in a single coat (up to 35 mils with force curing)
    • Compatible with controlled cathodic protection
    • Suitable for use in exposures as referenced in the following specifications:
    • Corp of Engineers C-200, C200a
    • AWWA C-210 for exterior
    • SSPC-Paint 16
    • Steel Tank Institute Corrosion Control System STI-P3

    Description:

    Renowned high build coal tar epoxy polyamide for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.


  • Carboglas 1601 SG

    Features:

    • Outstanding marine exposure resistance (atmospheric, tidal, subsea)
    • Excellent resistance to both organic and mineral acids
    • Excellent abrasion and impact resistance
    • Excellent resistance to bleach solutions and free chlorine
    • Outstanding long-term protection

    Description:

    This extremely durable and chemically resistant cladding utilizes a multi-step curing process that incorporates chemically-fused glass flake reinforcing in a highly cross-linked polyester matrix. The resultant layer is an extremely durable barrier against a variety of exposures including marine, fresh water, salt water, both mineral and organic acids, bleach solutions, and free chlorine. The multi-layer glass-flake reinforcement greatly impedes the penetration of water and other corrosives making this system extremely long performing.


  • Carboglas 5301

    Features:

    • Excellent resistance to a wide variety of chemicals, including organic and inorganic acids, alkalies and many solvents.
    • Highly suitable for immersion service as internal steel tank linings, as well as resisting splash, spill and fume exposures on structural steel.
    • Can be used to protect concrete from chemical exposure

    Description:

    Highly versatile coating and lining system with a unique combination of toughness to resist mechanical abuse along with excellent resistance to a wide variety of chemical exposures. Can be applied to steel and VAT, structural steel, grating, scrubber, secondary containment, process floors, sumps and trenches and clarifier.


  • Carboglas 5301 Accelerator

    Features:

    Description:

    Carboglas 5301 Accelerator is a liquid mix added to Carboglas 5301 to reduce set time.


  • Carboguard 151-2

    Features:

    • Solventless, high performance protection
    • Low-to-no odor
    • Easy to apply by standard equipment
    • Excellent chemical resistance
    • Fast cure
    • Tough abrasion resistant film
    • Excellent flexibility
    • Excellent corrosion protection
    • Impact resistant
    • Hi-build application
    • Internal film reinforcement (chopped strandmat)
    • Ideal for upgrading older crude storage facilities, which have been severely corroded
    • Has excellent resistance to crude oil, water and brine

    Description:

    Very tough, hard coating developed for glass-reinforced application up to 1/8” (0.32 cm) by two component airless spray, roller or squeegee. Excellent wetting properties minimize air entrapment frequently encountered during filled application with glass-reinforced materials. Carboguard 151-2 has sufficient flexibility to withstand the expansion and contraction effects encountered in large storage tanks. Component A is pigmented blue and Component B is pigmented yellow. When Carboguard 151-2 is properly mixed and applied, a uniform green color is obtained.


  • Carboguard 1341

    Features:

    • Universal primer and tie coat
    • Excellent adhesion to concrete and various Pyrocrete products
    • Low stress
    • Compatible with a variety of topcoats
    • Low odour
    • Provides 1-2 mils film build

    Description:

    A two-pack penetrating primer/sealer for contentious surfaces. It is highly flexible with good chemical and solvent resistance and accepts a variety of topcoats. Meets ASTM C-309 Type I specification for moisture retention of concrete.


  • Carboguard 193 Primer

    Features:

    • Excellent corrosion protection
    • High build film
    • Excellent adhesion
    • Very good abrasion resistance
    • Good all-round chemical resistance

    Description:

    An economical, lead-free, high build maintenance-coating primer. Cures to hard, tough film with excellent sub-film corrosion resistance. Has excellent physical properties and good all-round chemical resistance. Carboguard 193 Primer has excellent adhesion and better tolerance of field application variables than other types of coatings.


  • Carboguard 193 Primer S

    Features:

    • Excellent corrosion protection
    • High build film
    • Excellent adhesion
    • Very good abrasion resistance
    • Good all-round chemical resistance

    Description:

    An economical, lead-free, high build maintenance-coating primer. Cures to hard, tough film with excellent sub-film corrosion resistance. Has excellent physical properties and good all-round chemical resistance. Carboline 193 Primer S has excellent adhesion and better tolerance of field application variables than other types of coatings.


  • Carboguard 193 TL

    Features:

    • As a blast holding primer for systems being immersed in water.
    • As a lining for hot water cylinders operating at temperatures of 75°C to 90°C in continual or partial immersion.
    • As a primer on concrete substrates.
    • As a single coat direct to metal MIO finish.
    • Not recommended for immersion service in acids, alkalies or solvents.

    Description:

    Fast drying primer / finish with excellent water resistance.


  • Carboguard 195

    Features:

    Description:

    High build epoxy filler for sealing and surfacing irregular concrete and metal surfaces.


  • Carboguard 60

    Features:

    • Low odor and low VOC
    • Available in a variety of rapid tint colors
    • Attractive medium sheen for tank exteriors
    • Used as a primer, intermediate, or finish coat
    • Fast cure & dry times
    • Can be applied over power tool cleaned surfaces
    • VOC compliant to current AIM regulations

    Description:

    Carboguard 60 is a high solids, versatile corrosion resistant coating. It can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. This product has excellent wetting properties giving it the capability of going over marginally prepared substrates. It is ideal for maintenance and fabrication shop applications. An optional Glass Flake (GF) additive or micaceous iron oxide (MiO) additive can be purchased separately and may be used to enhance film strength for more abusive applications for severe marine or heavy industrial uses. Carboguard 60 is suitable for use as a blast-hold primer for tank linings used in crude oil storage, fuel oils, gasoline and water/wastewater up to 140°F (60°C). Consult Technical Service for suitable linings or for other exposures.


  • Carboguard 635

    Features:

    • Low temperature cure (20°F)
    • Excellent corrosion protection
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Extended recoat window for atmospheric exposures (6 months for most topcoats)

    Description:

    An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in potable water, fresh or salt water (marine) exposures.


  • Carboguard 690

    Features:

    • High solids, low VOC
    • High build (16 mils)
    • Low temperature cure (20°F)
    • Excellent moisture tolerance during application
    • Fast cure response
    • Suitable for use in USDA inspected facilities

    Description:

    High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Can be used on structural steel, piping, tankage, and equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects; and is ideal for coatings under insulation on pipes up to 300°F(150°C).


  • Carboguard 690 GF

    Features:

    • High solids, low VOC
    • High build (20+ mils)
    • Low temperature cure (20°F)
    • Excellent moisture tolerance during application
    • Fast cure response
    • Excellent physical and barrier properties

    Description:

    High performance, glass-flake filled, cold cure epoxy having excellent film strength and resistance to water, salt water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Glass flake reinforcement enhances film strength, impact resistance and barrier properties. Can be used on a variety of surfaces including structural steel, piping, pilings, ships, offshore structures and other equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects.


  • Carboguard 703

    Features:

    • High film build and edge protection
    • Excellent resistance to corrosion and abrasion
    • May be used in conjunction with cathodic protection
    • Application by airless spray equipment (plural component acceptable but not required)
    • Meets most VOC (Volatile Organic Content) regulations

    Description:

    Ultra high build, airless-applied, solvent-free coating for use on steel and concrete substrates. Widely used as a splash zone coating on marine installations, tank lining in petroleum services and for protection of buried pipelines. It has extremely good impact and abrasion resistance and is suitable for variety of heavy industrial applications.


  • Carboguard 703 GF

    Features:

    • High film build and edge protection
    • Excellent resistance to corrosion and abrasion
    • May be used in conjunction with cathodic protection
    • Application by airless spray equipment (plural component acceptable but not required)
    • Meets most VOC (Volatile Organic Content) regulations

    Description:

    Ultra high build, airless-applied, solventless coating for use on steel and concrete substrates. Widely used as a splash zone coating on marine installations, tank lining in petroleum services and for protection of buried pipelines. It has extremely good impact and abrasion resistance and is suitable for variety of heavy industrial applications. Carboguard 703 GF (Glass Flake) is specially formulated for higher abrasion resistance while retaining the temperature, chemical and other physical properties of Carboguard 703.


  • Carboguard 838

    Features:

    • Self priming
    • VOC compliant to current AIM regulations
    • Complies with BS 5493 standards for MIO (80%)
    • Excellent film build and edge protection
    • Good abrasion resistance
    • Excellent surface tolerance

    Description:

    High performance, high solid epoxy with excellent corrosion protection used either as primer or as an intermediate coat over steel and zinc primers Can be topcoated with a broad variety of high performance finish coats


  • Carboguard 890

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics
    • Conventional and low-temperature versions
    • Self-priming and primer/finish capabilities
    • Very good abrasion resistance
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities

    Description:

    Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions.


  • Carboguard 890 GF

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics for less severe applications
    • Low-temperature version: 890 LT GF
    • Self-priming and primer/finish capabilities
    • Excellent abrasion resistance & hardness
    • VOC compliant to current AIM regulations
    • Non-skid service with optional fillers

    Description:

    A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the water line) in marine applications where these resistance qualities are desired.


  • Carboguard 890 GF2

    Features:

    • Convenient two-component mix
    • Excellent chemical resistance
    • Surface tolerant characteristics for less severe applications
    • Self-priming and primer/finish capabilities
    • Excellent abrasion resistance & hardness
    • VOC compliant to current AIM regulations

    Description:

    A two-component, glass reinforced epoxy coating. 890 GF2 is chemical resistant and has a wide range of uses in industrial environments. Its glass reinforcement allows for excellent internal film strength, hardness, impact, and abrasion resistance. Most commonly, it is used in severe service (above or below the water line) in marine applications where these resistance qualities are desired.


  • Carboguard 891 VOC

    Features:

    • NSF/ANSI-61 approved for potable water tanks*
    • Meets the FDA requirements for 21CFR 175.300 for direct food contact
    • Ultra High solids; Low VOC and HAPs
    • Handles deionized water up to 150°F (66°C)
    • VOC compliant for South Coast; <100 g/l VOC
    • Good chemical resistance
    • Excellent thermal shock resistance
    • Good abrasion resistance

    Description:

    Ultra high solids epoxy that is designed as a liner for potable water, demineralized water, wastewater and many other services. It is widely used as a tank lining for steel and concrete tanks. Product is self-priming and is normally applied in two coats. Formulated for application at conventional builds (4 to 6 mils per coat) as well as high builds (10 mils per coat).


  • Carboguard 893

    Features:

    • Excellent corrosion protection
    • Excellent film build and edge protection
    • Used as a primer or an intermediate coating
    • Good abrasion resistance
    • Cures down to 40°F
    • VOC compliant to current AIM regulations

    Description:

    High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over steel and inorganic zinc primers. Can be topcoated with a broad variety of high performance finish coats.


  • Carboguard 893 MIO

    Features:

    Description:


  • Carboguard 893 SG

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Available in a variety of rapid tint colors
    • Attractive low sheen for tank exteriors
    • Used as a primer, intermediate, or finish coat
    • Power tool cleaned surfaces acceptable
    • Optional low temperature (LT) cure Part B
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating for a variety of uses. Used either as a primer, intermediate coat, or self-priming finish over steel, zinc primers or as a sealer for metallizing. May be topcoated with itself, or a broad variety of high performance finish coats. Has surface tolerant properties. Optional (LT) cure for 35°F cure capability. See separate data sheet.


  • Carboguard 893 SG MIO

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Used as a primer or intermediate coat
    • Can be applied over power tool cleaned surfaces
    • Micaceous iron oxide (MiO Filler) for additional barrier properties and corrosion resistance: MiO is purchased separately
    • Optional low temperature (LT) cure Part B
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating. Used either as a primer or intermediate coat over steel, other epoxies or inorganic zinc primers. May be topcoated with a broad variety of high performance finish coats. Has surface tolerant properties. Has optional (LT) cure for 35°F cure capability.


  • Carboguard E-19

    Features:

    • Excellent corrosion protection
    • Excellent film build and edge protection
    • Used as primer or an intermediate
    • One year recoat window

    Description:

    A general purpose corrosion resistant primer/intermediate coating containing zinc phosphate pigment. Used either as a primer or an intermediate coat over steel and inorganic zinc primers. Recommended as a blast primer on steel that needs temporary protection. Performs extremely well under a wide variety of topcoats.


  • Carboguard E-20

    Features:

    • Excellent corrosion resistance
    • Good all round chemical resistance
    • Good Flexibility
    • Very Good Abrasion Resistance

    Description:

    An economical, high-gloss maintenance coating. Cures to a hard, tough film, with excellent sub-film corrosion resistance. Has excellent physical properties and good all-around chemical resistance. A high-gloss finish provides a clean pleasing surface.


  • Carboguard E-96

    Features:

    • High film build and edge protection
    • Self priming and primer/finish capabilities
    • Application by airless spray equipment (plural component acceptable but not required)
    • Meets most VOC (Volatile Organic Content) regulations

    Description:

    Carboguard E-96 is a high solids, low VOC, quick cure, high build epoxy with excellent chemical and abrasion resistance. It is designed for use in industrial and marine. It has extremely good impact and is suitable for variety of heavy industrial applications.


  • Carbomastic 15

    Features:

    • Excellent performance over minimal surface preparation of steel substrates
    • Suitable as a topcoat for most tightly adhered existing coatings
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • Unique formulation with aluminum flakes provides exceptional barrier protection
    • May be applied at 35°F (2°C) when CM 15 FC's part B is utilized
    • Suitable for use under insulation on hot surfaces operating up to 300°F(150°C)
    • VOC compliant to current AIM regulations

    Description:

    Aluminum-pigmented, low-stress, high-solids mastic with a proven field history. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.


  • Carbomastic 615

    Features:

    • High solids, low VOC
    • Low temperature cure
    • Excellent wetting properties
    • Excellent surface tolerance
    • Excellent moisture tolerance (application)
    • Fast cure response
    • Suitable for immersion service in fresh or salt water after 60 minute cure @75°F

    Description:

    High performance epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. It contains an inert flake reinforcement (micaceous iron oxide) to enhance film strength and performance. This product is ideal for industrial or heavy duty marine environments for the protection of steel against salt laden environments.


  • Carbothane 133 HB

    Features:

    • Outstanding performance properties in both mild and aggressive environments
    • High build; suitable for many two-coat systems
    • Suitable for application direct to inorganic zincs
    • Application by spray, brush or roller
    • Indefinite recoatability
    • VOC compliant to current AIM regulations

    Description:

    High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.


  • Carbothane 134

    Features:

    • Thin-film, single coat protection
    • Excellent gloss and color retention
    • Excellent weatherability
    • Excellent abrasion resistance
    • Excellent flexibility

    Description:

    A glossy, tile like, attractive topcoat, produces a smooth, slick and hard film which is readily cleaned. It has a very good resistance to splash and spillage of acids, alkalies and most solvents. It exhibits excellent resistance to splash and spillage of salts and water. It is easily applied by airless or conventional spray.


  • Carbothane 134 HG

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Available in all Carboline colors including metallic-pigmented colors
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities

    Description:

    Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.


  • Carbothane 134 HG Aluminum

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Available in metallic-pigmented colors
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant to current AIM regulations

    Description:

    Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.


  • Carbothane 137 HS

    Features:

    Description:

    Carbothane 137 HS is a fast-drying, high build, two component polyurethane coating which exhibits excellent dry times and handling characteristics required by Original Equipment Manufacturers. Has excellent UV resistance and good corrosion resistance in direct to metal applications for C1 to C3 environments, over primers for C4 to C5 environments.


  • Carbothane 834

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Available in custom colors
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant

    Description:

    Thin film, high gloss finish with exceptional weathering performance characteristics. This is a regional product predominantly used in Europe. Used extensively in virtually all industrial markets, it provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.


  • Carbothane 834 ME

    Features:

    • Excellent weather-ability
    • Excellent flexibility
    • Excellent abrasion resistance
    • Meets most VOC (Volatile Organic Content) requirements

    Description:

    High solids, attractive finish which is easily applied by airless or conventional spray to yield a hard, very cleanable surface. Recommended as a finish coat for exteriors of tanks, equipment, piping, structural steel and concrete surfaces where chemical resistance, high gloss and color retention are required.


  • Carbotherm 3300

    Features:

    • Excellent thin-film insulation
    • Unique formula provides superior coverage during application
    • Protects personnel from hot surfaces
    • Multi-purpose interior/exterior coating
    • Insulation provides anti-condensation properties
    • Easy to use
    • Zero VOC; Low odor
    • May be applied to hot surfaces

    Description:

    Carbotherm 3300 is a ceramic blend insulative composite coating formulated in a high temperature resistant acrylic binder. It is ideally suited as a protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate sweating of pipes or other operating equipment.


  • Carbotherm 551

    Features:

    • Excellent thin-film insulation
    • Unique epoxy formula outperforms acrylic-based materials
    • Tougher and more durable than acrylic coatings
    • Higher chemical resistance than acrylic coatings
    • Topcoats are optional
    • Protects personnel from hot surfaces
    • Ideal for industrial/aggressive applications
    • Insulation provides anti-condensation properties
    • Acceptable for use in USDA facilities
    • High film build per coat; fewer coats
    • Low VOC; low odor
    • May be applied to hot surfaces

    Description:

    Carbotherm 551 is a unique insulative composite coating formulated in a high temperature resistant epoxy binder. Unlike acrylic-based insulative materials it has superior toughness, hardness, impact resistance, chemical resistance and permeation resistance. It is therefore more suitable for industrial applications or other physically demanding environments. It is an ideal protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate condensation of pipes or other operating equipment. Its superior application properties of higher film build per coat and fewer coats offers savings and quicker return to service. Because it bonds directly to the surface (unlike standard insulation materials) it minimizes water entry and the effect of corrosion under insulation.


  • Carboxane 2000

    Features:

    • Exceptional weatherability
    • Long life performance
    • Outstanding gloss/color retention
    • VOC compliant
    • Excellent abrasion resistance
    • Isocyanate free
    • Flexible Film

    Description:

    Carboxane 2000 is a premium, ultra-durable coating that provides outstanding gloss and color retention for exterior exposures. When used over a suitable primer (as a two coat system) Carboxane 2000 provides the barrier properties normally seen using a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This tightly cross-linked film utilizes a UV-resistant siloxane binder resulting in a finish with outstanding barrier properties and weathering performance that far exceeds polyurethanes.


  • Carbozinc 11

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
    • Rapid cure. Dry to handle in 45 minutes at 60°F (16°C) and 50% relative humidity.
    • Low temperature cure down to 0°F (-18°C).
    • High zinc loading.
    • Meets FDA requirements.
    • Zinc supplied meets ASTM D520 (Type II)*
    • Meets SSPC Paint 20 Type I, Level 1 for zinc content.
    • Very good resistance to salting.
    • May be applied with standard airless or conventional spray equipment.
    • VOC compliant in certain areas

    Description:

    Time-tested corrosion resistant primer that protects steel galvanically in the harshest environments. For over five decades, Carbozinc 11 (CZ 11) has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide.


  • Carbozinc 655

    Features:

    • Excellent application properties
    • Excellent adhesion & undercutting resistance
    • Fast drying for quick recoating

    Description:

    A two-component, high solids, economical zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. This product can be applied by conventional, and airless spray.


  • Carbozinc 858

    Features:

    • Ready to apply as supplied
    • Meets SSPC Paint System 20
    • Low temperature cure down to 35°F (2°C)
    • Protects against undercutting corrosion
    • May be applied with standard airless or conventional spray equipment
    • VOC compliant to current AIM regulations

    Description:

    Low VOC organic zinc epoxy steel primer with quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 858 has very good adhesion and undercutting resistance and is excellent for use as a corrosion resistant primer for a variety of applications.


  • Carbozinc 858 (3K)

    Features:

    • Protects steel galvanically
    • Outstanding application properties
    • Cures at low temperatures down to 35°F(2ºC)
    • Tough and abrasion resistant film
    • Wide use in severe industrial or marine environments

    Description:

    A high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in highly corrosive environments including offshore, marine and industrial. This low VOC, HAPs compliant primer has quick cure-to-topcoat characteristics for in-shop applications and quick turnaround capabilities for the field. It has excellent adhesion and undercutting resistance and is outstanding for use as a corrosion resistant primer for a variety of applications.


  • Carbozinc 859

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
    • Rapid cure. Dry to recoat in 30 minutes at 75°F (24°C) and 50% relative humidity.
    • Complies with SSPC Paint 20 (Type II)
    • Low temperature cure down to 35°F (2°C)
    • Excellent adhesion
    • Protects against undercutting corrosion
    • Field proven primer that applies well by spray methods
    • Excellent touch-up primer by brush or roll for small areas.
    • VOC compliant to current AIM regulations

    Description:

    Low VOC organic zinc epoxy steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 859 has less than 3.0 lbs/gallon VOC (thinned) and is used extensively in virtually all industrial markets.


  • Carbozinc 860 ME

    Features:

    • Rapid cure. Dry to recoat in 30 minutes at 75°F (24°C) and 50% relative humidity
    • Low temperature cure down to 35°F (2°C)
    • Excellent adhesion and undercutting resistance
    • May be applied with standard airless or conventional spray equipment
    • 90% total zinc in the dry film

    Description:

    Steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and rapid-turnaround requirements in the field. Carbozinc 860 ME has less than 3.0 lbs/gallon VOC (thinned) and is used extensively in virtually all industrial markets.


  • Carbozinc 8701

    Features:

    • Excellent application properties
    • Tough abrasion resistant film
    • Excellent adhesion & undercutting resistance
    • Superior corrosion resistance
    • Meets VOC (Volatile Organic Content) regulations
    • Fast drying for quick recoating

    Description:

    A two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. This product can be applied by conventional or airless spray. Recommended for Original Equipment Manufacturers where a high performance, highly corrosion resistant zinc primer is desired. Typical applications include marine, offshore drilling equipment, truck trailer chassis, underbodies and related equipment, industrial and off-road machinery, electrical transformers, industrial tanks, vessels, pumps and processing equipment.


  • Galvanox Type I

    Features:

    Description:

    Galvanox Type I is a ready-mixed chlorinated rubber, zinc-rich coating. The use of Galvanox Type I provides a method of applying galvanic protection by standard paint application methods. Galvanox Type I may be described as a cold galvanizing compound, for it prevents corrosion of the steel substrate in the same manner as hot dip galvanizing. When applied to a ferrous surface, the zinc metal in Galvanox Type I acts as the anode and sacrifices itself preferentially to protect the steel which acts as the cathodes.


  • Phenoline 1205

    Features:

    • Excellent resistance to acids, caustics, ethanol, gasoline, jet fuels and solvents.
    • Excellent abrasion resistance.
    • Excellent thermal shock resistance (0 to 300° F).
    • VOC compliant to current AIM regulations.
    • Excellent resistance to deionized or demineralized water up to 203°F (95°C).
    • Excellent resistance to crude oil up to 250°F (121°C).
    • Excellent for crude oil storage and transportation up to 250° F (121° C)

    Description:

    Glass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement. 1205 exhibits very good acid resistance. Excellent for use as a lining for tanks or pipes in process facilities where hot water or abrasive conditions exist.


  • Phenoline 187 VOC

    Features:

    • High solids; Low VOC formula
    • VOC compliant to current AIM regulations
    • Excellent overall chemical resistance
    • Excellent for crude-oil storage
    • Excellent resistance up to 400°F(204°C)
    • Excellent abrasion & thermal shock resistance
    • Meets the FDA requirements for 21CFR 175.300 for direct food contact.

    Description:

    High solids epoxy lining with exceptional chemical resistance. Primarily as a tank lining, it is recommended for storage of crude oil (180°F/82°C), demineralized water (150°F/65°C), tap water (200°F/93°C) food and beverage industries, and water and wastewater exposures. Is excellent as a protective coating under insulation, operating at (400°F/204°C). Outstanding resistance to wet/dry cycling conditions at these elevated temperatures.


  • Phenoline 311 Primer

    Features:

    • Approved for potable water, ANSI/NSF standard 61*
    • Low temperature cure (20°F)
    • Excellent blast-hold protection
    • Suitable for use over damp concrete
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Meets VOC restrictions
    • Low HAP’s content

    Description:

    A tank lining holding primer that has a variety of attributes including low-temperature cure, fast recoat times, moisture tolerance during application and cure, and excellent blast-hold protection. Phenoline 311 Primer is often used with thick film lining systems as a holding primer (maintain blast cleaning) and is suitable for both new tanks and relines. It exhibits excellent surface wetting characteristics and quick cure for handling. It contains high levels of inert flake reinforcement. Excellent for use as a bonding primer for linings when damp concrete or masonry substrates are encountered.


  • Phenoline 311 Primer ME

    Features:

    • Low temperature cure (20°F)
    • Excellent blast-hold protection
    • Suitable for use over damp concrete
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Meets VOC restrictions
    • Low HAP’s content

    Description:

    A tank lining holding primer that has a variety of attributes including low-temperature cure, fast recoat times, moisture tolerance during application and cure, and excellent blast-hold protection. Phenoline 311 Primer ME is often used with thick film lining systems as a holding primer (maintain blast cleaning) and is suitable for both new tanks and relines. It exhibits excellent surface wetting characteristics and quick cure for handling. It contains high levels of inert flake reinforcement. Excellent for use as a bonding primer for linings when damp concrete or masonry substrates are encountered.


  • PHENOLINE 379

    Features:

    • Single coat application reduces labor costs
    • Ultra-high build capabilities provides a voidfree film and excellent edge protection
    • Resistant to inorganic and organic acids, caustics and most solvents
    • Can be mat reinforced where exposure conditions dictate
    • Application by airless spray equipment (plural component acceptable but not required)
    • VOC compliant to current AIM regulations

    Description:

    Single-coat, airless-applied, ultra-high build coating for use on steel and concrete substrates subject to aggressive chemical exposure. Phenoline 379 has the same application and physical properties of Phenoline 309 but provides enhanced chemical protection for a broader and more concentrated range of acids.


  • Phenoline 385

    Features:

    • High solids; Low VOC formula
    • VOC compliant to current AIM regulations
    • Excellent for crude-oil storage
    • Excellent resistance to petroleum products
    • Excellent abrasion resistance
    • Excellent thermal shock resistance

    Description:

    High performance, high solids, epoxy lining that is recommended for a variety of petroleum storage products including 180°F (82°C) crude oil, demineralized water 150°F (65°C), crude/water mixtures, fuel oil, jet fuel, biodiesel, and gasoline. It is also a good choice for wastewater and water exposures. Product is self-priming and is normally applied in two coats. It is also suitable for food-grade (aqueous) cargos and meets the FDA requirements for 21CFR 175.300 for direct food contact.


  • Phenoline Tank Shield

    Features:

    • Batch mix formulation, single leg airless spray.
    • High impact resistance
    • Superior adhesion to steel
    • Excellent resistance to water and salt water
    • Resistance to a broad range of fuels including ethanol
    • Resistant to hot water up to 150°F/65°C
    • Excellent abrasion resistance and flexibility
    • Can be applied down to 35°F/2°C
    • Can be applied as a single or multi-coat system
    • Non-blushing with a long recoat window
    • Low odor

    Description:

    This product is a solvent-free, high performance epoxy coating designed as an internal tank, valve and pipe lining for chemical or other commodity storage. It is a unique blend of resins and curing agents that allow batch mixing for ease of application. Plural component spray equipment is not required. The product is blush resistant and is typically applied at film thicknesses of 20-35 mils (500-875 microns) or thicker as needed (tank floors). It can handle exposures typically seen in the oil and gas industries; crude oils and fuels. It is resistant to NGL condensates, produced water, brines, and industrial process water.


  • Phenoline Thinner

    Features:

    Description:


  • Plasite 4301 HT

    Features:

    • Outstanding resistance to aggressive chemicals
    • Suitable for use as a highly chemically resistant lining
    • Excellent for splash, spill and film exposures on structural steel
    • Glass-flake reinforced film
    • High tensile and flexural strength
    • High film thickness

    Description:

    This high performance glass-flake filled coating was designed for application over steel or concrete in extreme chemical exposures. It is resistant to a wide variety of aggressive chemicals, including organic and inorganic acids, most alkalies, and many solvents. It is ideally suited for immersion service as internal steel tank linings, as well as for aggressive chemical splash, spill, and fume exposures on structural steel. Typical uses include steel tank and vat linings, secondary containment, structural steel, process floors, grating, sumps and trenches, scrubbers, and clarifiers.


  • Plasite 4500

    Features:

    • High impact resistance
    • Superior adhesion to steel
    • Resistance to a broad range of chemicals
    • Can be applied as low as 35°F/2°C
    • Can be applied as a one-coat 20-60 mil system

    Description:

    PLASITE 4500 is a solvent free, flake-reinforced, high performance epoxy coating designed as an internal tank lining for chemical or other commodity storage. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, many acids and some solvents. It is suitable for use in potable water tanks/piping conforming to ANSI/NSF Standard 61 for drinking water components. It also meets AWWA C210 specification.


  • Plasite 4500 S

    Features:

    Description:

    Plasite 4500 S is a 100% solids, flake-filled, premium epoxy coating designed for internal steel and concrete tanks and pipe lining. It is a two component system consisting of 4-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, in a one-coat application (20-60 mils) for internal lining applications. It also meets AWWA C210 specification.


  • Plasite 4550

    Features:

    • High Impact Resistance
    • Superior adhesion to metal substrates and concrete
    • Outstanding adhesion to stainless steel, even with low blast profiles
    • Well suited to protect alloy steels typically used to wet FGD systems where pitting and crevice corrosion often occur
    • Fast cure-to-service; depending upon application can be placed into service within 36 hours
    • Minimal blushing characteristics
    • Can be applied in temperatures as low as 35°F
    • Can be applied as a one-coat system
    • Tested and approved for crude oil storage and transport up to 350°F (177°C)
    • Superior thermal shock resistance from -40 to 350°F (-40-177°C)
    • Complies with the API RP 652 definition of a reinforced liner.

    Description:

    PLASITE 4550 is a 100% solids, reinforced, premium novolac epoxy coating for internal tank lining. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, sour crude oil and 98% sulfuric acid.


  • Plasite 4550 S

    Features:

    • High impact and thermal shock resistance
    • Superior adhesion to steel and concrete
    • Resistance to a broad range of chemicals
    • Can be applied up to 60 mils in one coat
    • Can be sprayed using single component airless equipment

    Description:

    PLASITE 4550 S is a 100% solids, flake filled, premium novolac epoxy coating designed for internal steel and concrete substrates. It is a two component system consisting of four-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, from a total thickness of 20-60 mils (500-1500 microns) in a single coat application for a variety of applications. This product has been tested and is approved for crude oil storage and transportation up to 350°F (177°C). It has superior thermal shock resistance over the range -40° to 350°F (-40 to 177°C). Typical Uses: Crude oil tankers, chemical storage tanks, wastewater clarifiers, plating vats, oil storage tanks, catwalks, pulp and paper liquor tanks or concrete exposures in wastewater applications.


  • Plasite 7159

    Features:

    • Easy-to-apply high performance thin film lining
    • Protects I high temperature demineralized water immersion - 212°F (100°C)
    • Recommended in high pressure three phase service up to 250°F (121°C)
    • Resists strong oxidizer and acid immersion
    • Can be air dried or force cured for prompt service

    Description:

    A water-resistant epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry.


  • Polyclad 777 Medium-Set

    Features:

    • Rapid curing to increase through put
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Robust 1:1 mix ratio and user friendly application properties
    • Can be topcoated by Carbothane aliphatic polyurethanes
    • Unlimited build with single multi-pass coats
    • Compliant with AWWA C222

    Description:

    Polyclad 777 Medium Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.


  • Polyclad 777 Snap-Set

    Features:

    • Rapid curing to increase through put
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Robust 1:1 mix ratio and user friendly application properties
    • Can be topcoated by Carbothane aliphatic polyurethanes
    • Unlimited build with single multi-pass coats
    • Compliant with AWWA C222

    Description:

    Polyclad 777 Snap Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.


  • Pyrocrete 239

    Features:

    • Combined acoustical and fire protection
    • Easily applied by spray or trowel
    • Excellent physical properties – hard, durable
    • Nonflammable – during or after application
    • Asbestos-free – complies with EPA and OSHA regulations
    • Chloride and sulfide free – no special priming required
    • Non-friable – high impact strength
    • Single package – mixed with clean, potable water at the job site
    • Investigated for exterior use by Underwriters Laboratories, Inc
    • Quality Manufactured – under strict Carboline quality standards
    • UL factory inspection service

    Description:

    A medium density, Portland cement based, cementitious fireproofing that is mixed with clean, potable water onsite before application and spray applied to the substrate. It provides 1 - 4 hour fire protection for structural steel, wood, bulkheads, and upgrades the fire resistance of existing concrete. It can also be used as a thermal barrier over polyurethane foam. Recommended areas of application include pharmaceutical facilities, pulp and paper mills, nuclear and conventional power plants, factories, warehouses, stadiums, institutional and biomedical facilities and acoustical applications .


  • Pyrocrete 241

    Features:

    • Over 35 years of proven performance
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • BS 476 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 55 lb./ft³ (881 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 241 HY

    Features:

    • Cost effective, high yield
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 50 lb./ft³ (800 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 40

    Features:

    • Cost effective fireproofing solution
    • Outstanding coverage, high build
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • BS 476 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Easy application by spray or trowel
    • Non-flammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 40 lb./ft³ (640 kg/m³) minimum average density, Portland cement based, cementitious fireproofing product. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrolite 15

    Features:

    • Durable cementitious formulation
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set and increased yield (optional)
    • Asbestos-free – complies with EPA and OSHA regulations.
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases.
    • Economical – Maintains project on budget.
    • Design flexibility with over 40 UL designs.

    Description:

    A 15 lbs./ft³ density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours.


  • Pyrolite 22

    Features:

    • Durable cementitious formulation
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set and increased yield (optional)
    • Asbestos-free – complies with EPA and OSHA regulations.
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases.
    • Economical – Maintains project on budget.
    • Design flexibility with over 40 UL designs.

    Description:

    A 22 lbs./ft³ density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours.


  • Reactamine 760

    Features:

    • UL approved for ANSI/NSF Std. 61 potable water*
    • Complies with 21 CFR 175.300 Method D, E, & G and Direct Dry Food Contact
    • Complies with Greenbook
    • Cold temperature cure
    • Fast cure and walk on time
    • Excellent barrier properties, low permeability
    • Single-coat application 60 to 125 mils
    • Bridges normal shrinkage cracks in concrete
    • True monolithic film on steel and concrete
    • Encapsulates rivets, bolts, and edges in one coat
    • Outstanding abrasion, impact and tear resistance
    • Combines polyurethane and polyurea technologies to form a hybrid polyurethane

    Description:

    Environmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service.


  • Rustbond

    Features:

    • Universal primer and tie-coat
    • Excellent adhesion to SSPC-SP 2 prepared steel, galvanizing, aluminum, stainless steel and copper
    • Low stress, highly flexible film
    • Extremely high solids
    • Low odor
    • Contains corrosion inhibitors
    • Compatible with a variety of topcoats
    • User friendly brush and roller application
    • VOC compliant to current AIM regulations

    Description:

    Rustbond is a cross-linked penetrating primer/sealer with excellent wetting properties. It is highly flexible with good chemical and solvent resistance, and accept a variety of topcoats. Recommended use as primer/sealers for marginally prepared steel and over old coatings. Its excellent wetting properties allows it to penetrate rust and discontinuities in existing coatings and provide a firm anchorage for a variety of topcoats. Its thixotropic character reduces run off, ensuring that the edges of existing coatings are encapsulted thus reducing undercutting and peeling. It may also be used as a tie-coat for coatings that exceed their “recoat window.” Consult Carboline Technical Services Department for specific recommendations.


  • Semstone 110

    Features:

    • Outstanding wetting properties
    • Solvent-free
    • Long working time
    • Excellent adhesion
    • Compatible with a variety of toppings

    Description:

    Two part epoxy exhibiting superior adhesion to concrete and steel. Used primarily as a primer/sealer for concrete surfaces and top coated with a variety of chemically resistant toppings.


  • Semstone 140

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding properties
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    High performance lining system designed for concrete. Semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals.


  • Semstone 145

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior acid resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    100% solids, high performance, novolac epoxy lining system designed for concrete. It is a semi-leveling coating and may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals, including 98% sulfuric acid, as well as many organic chemicals and solvents.


  • Semstone 5407

    Features:

    Description:

    Semstone 5407 is a 100 % solids, moisture epoxy mortar. It is a three component system consisting of Part A resin and Part B hardener. A premeasured aggregate (Part C) blend component is included with each kit. This product is designed to be applied by trowel from 1/8" to 1/4" or up to 3/8” needed. Semstone 5407 is formulated to provide exceptional performance in areas subject to extreme mechanical abuse. It possesses excellent resistance to impact, heavy loads, thermal stresses and abrasive environments. With appropriate chemical resistant top-coat, it will resist acids, alkalies and solvent attack.


  • SEMSTONE 8084

    Features:

    • High adhesion
    • Impact resistant

    Description:

    Semstone 8084 is a two-part rubberized vinyl ester primer. It is used under Semstone vinyl ester lining systems to impart high adhesion and impact resistance.


  • SOUTHWEST TYPE 5GP

    Features:

    • Durable cementitious formulation
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set and increased yield (optional)
    • Asbestos-free – compliant with EPA and OSHA
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases
    • Economical – Maintains project on budget
    • Design flexibility with over 100 UL designs

    Description:

    A 15 lb./ft³ (240 kg/m³) SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. Southwest Type 5GP is a trademark of the Southwest Fireproofing Products Company.


  • SOUTHWEST TYPE 5MD

    Features:

    • Durable cementitious formulation
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set and increased yield (optional)
    • Asbestos-free – compliant with EPA and OSHA
    • Mineral Wool free – no airborne fibers
    • Styrene free – no toxic decomposition gases

    Description:

    A medium density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. Southwest Type 5MD is a trademark of the Southwest Fireproofing Products Company.


  • SOUTHWEST TYPE 7GP

    Features:

    • Damage resistant and permanent
    • Noncombustible
    • High build
    • Moisture resistant
    • Asbestos-free – complies with EPA and OSHA regulations.
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases.
    • Economical – Maintains project on budget.
    • Design flexibility with over 100 UL designs.

    Description:

    A 22 lb./ft³ (352 kg/m³) density (average) SFRM intended for the fire protection of structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. It was specifically formulated for high humidity areas such as mechanical rooms, elevator shafts and parking garages and is resistant to damage and moisture. Southwest Type 7GP is a trademark of the Southwest Fireproofing Products Company.


  • Splash Zone A-788

    Features:

    • Designed for underwater and other wet applications
    • Can be applied up to 2" in thickness
    • Self-priming on most surfaces and over most generic types of coatings
    • Rapid cure characteristics
    • VOC compliant to current AIM regulations

    Description:

    Solvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces. Has the unique ability to be mixed, applied and cured underwater.


  • Surface Cleaner 3

    Features:

    • Minimum Toxicity - Waterborne
    • Biodegradable

    Description:

    Cleaning agent used for degreasing and cleaning contaminated surfaces prior to painting. This product is biodegradable and can be used on both painted and unpainted surfaces.


  • Thermaline 450 EP

    Features:

    • Continuous temperature resistance to 400°F(204°C)
    • Very good flexibility
    • Excellent overall chemical resistance
    • Very good abrasion resistance
    • Easily applied by spray
    • Acceptable for use over stainless steels
    • High solids, low VOC formula

    Description:

    A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating continuously up to 400°F/204°C. It has excellent chemical resistance properties to handle the corrosive effects of wet insulation under thermal cycling conditions. This product is recommended for CS-3 and SS-2 systems of NACE SP0198 Standard Practice for coatings to handle corrosion under insulation (CUI).


  • Thermaline 4700

    Features:

    • Resistant to severe thermal shock
    • Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
    • Air-dries to touch and provides barrier protection prior to heat curing (full film physical properties occur after heat curing)

    Description:

    High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1000°F (204°C-538°C) Color stability at maximum temperature will depend on color selected. Requires heat curing.


  • Thermaline 4700 Aluminum

    Features:

    • Resistant to severe thermal shock
    • Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
    • Air-dries to touch (full film formation properties occurs after heat curing)

    Description:

    High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1000°F (204°C-538°C) Color stability at maximum temperature will depend on color selected. Requires heat curing.


  • Thermaline 4900

    Features:

    • Temperature resistance up to 500°F (260°C) for black **
    • Air-dried curing capabilities
    • Single-coat application
    • Excellent resistance to thermal shock
    • Good weathering and color stability
    • RTS colors available

    Description:

    Air-dried coating available in colors and suitable for high temperature exposures up to 500°F (260°C). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 300°F (149°C) is recommended and will impart added strength and integrity to the coating.


  • Thermaline 4900 Aluminum

    Features:

    • Temperature resistance up to 525°F (273°C)
    • Air-dried curing capabilities
    • Single-coat application
    • Excellent resistance to thermal shock
    • Good weathering and color stability

    Description:

    Air-dried coating available in colors and suitable for high temperature exposures up to 525°F (273°C). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 300°F (149°C) is recommended and will impart added strength and integrity to the coating.


  • Thermaline Heat Shield

    Features:

    • Unique reinforced but flexible polymer film
    • Versatile use from cryogenic to 1200°F (650°C) exposures
    • Dries to handle without heat cure (See curing schedule)
    • Outstanding barrier properties
    • Protects steel from thermal wet cyclic conditions
    • Suitable for both shop and field application
    • Provides corrosion protection even with ambient temperature cure
    • Self priming or apply over Carbozinc 11 primers when uninsulated
    • Protects stainless steels from chlorides and stress corrosion cracking
    • Very fast recoat times

    Description:

    This is an extreme performance coating for hot, cryogenic and cycling exposures. Thermaline Heat Shield contains a unique blend of plate-like reinforcing pigments fortified with an inert polymeric matrix. The resulting film provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments. This versatile coating is ideal for all piping, vessels and equipment operating from cryogenic conditions up to 1200°F. It is particularly well suited to prevent corrosion under insulated equipment/piping for both carbon steel substrates and stainless steels. This fortified coating has superior shop handling properties over standard silicone coatings (see Curing). It is recommended for CS-6 and SS-5 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).


  • Thermo-Lag 3000-P

    Features:

    • UL listed - designs for many types of steel sections up to 4 hour fire ratings for both interior and exterior environments.
    • Durable finish - provides a hard, durable finish resistant to normal wear.
    • Thin film coating - offers an economical solution to alternative fireproofing.
    • VOC compliant
    • Easy repair - if damaged it can be repaired easily using material as putty.

    Description:

    Thermo-Lag® 3000-P is a petrochemical grade, 100% solids epoxy based intumescent designed to fireproof steelwork for up to a 4 hour fire rating, depending on the design. The recommended use for this product is fireproofing of steel beams, columns, tubes, pipes, vessel skirts, bulkheads, underdecks and electrical raceways.


  • Thermo-Lag 3000-SP

    Features:

    • UL listed - designs for many types of steel sections up to 4 hour fire ratings for both interior and exterior environments.
    • Durable finish - provides a hard, durable finish resistant to normal wear.
    • Thin film coating - offers an economical solution to alternative fireproofing.
    • VOC compliant
    • Easy repair - if damaged it can be repaired easily using material as putty.

    Description:

    Thermo-Lag® 3000-SP is a petrochemical grade, 95% solids epoxy based intumescent designed to fireproof steelwork for up to a 4 hour fire rating, depending on the design. The recommended use for this product is fireproofing of steel beams, columns, tubes, pipes, vessel skirts, bulkheads, underdecks and electrical raceways.


  • Thermo-Lag E100

    Features:

    • Certified to UL 263 / ASTM E119 / NFPA 251
    • Exterior and interior rated
    • High quality aesthetic finish
    • Does not require reinforcing mesh
    • Low thickness requirements
    • High build, fast recoat
    • Saves application time, lowering installation cost
    • Rugged durable material suitable for onsite or offsite applications
    • LEED compliant, low VOC
    • Low outgassing properties for clean room environments

    Description:

    An epoxy intumescent fireproofing for commercial and light industrial applications. It was specifically designed with an advanced formulation to provide 1-3 hour cellulosic fire protection for structural steel beams, I-section columns, tubular columns and pipes without the need for reinforcing mesh. It provides a fast curing, aesthetically pleasing fire protection solution and is rated for both exterior and interior applications.


  • Thermo-Lag E100 S

    Features:

    • Certified to UL 263 / ASTM E119 / NFPA 251
    • Exterior and interior rated
    • High quality aesthetic finish
    • Does not require reinforcing mesh
    • Low thickness requirements
    • High build, fast recoat
    • Saves application time, lowering installation cost
    • Rugged durable material suitable for onsite or offsite applications
    • LEED compliant, low VOC
    • Low outgassing properties for clean room environments

    Description:

    An epoxy intumescent fireproofing for commercial and light industrial applications. It was specifically designed with an advanced formulation to provide 1-3 hour cellulosic fire protection for structural steel beams, I-section columns, tubular columns and pipes without the need for reinforcing mesh. It provides a fast curing, aesthetically pleasing fire protection solution and is rated for both exterior and interior applications.


  • Thinner 10

    Features:

    Description:


  • Thinner 15

    Features:

    Description:


  • Thinner 19

    Features:

    Description:


  • Thinner 2

    Features:

    Description:


  • Thinner 21

    Features:

    Description:


  • Thinner 213

    Features:

    Description:


  • Thinner 215

    Features:

    Description:


  • Thinner 216M

    Features:

    Description:


  • Thinner 225 E

    Features:

    Description:


  • Thinner 235

    Features:

    Description:


  • Thinner 25

    Features:

    Description:


  • Thinner 254

    Features:

    Description:


  • Thinner 26

    Features:

    Description:


  • Thinner 33

    Features:

    Description:


  • Thinner 45

    Features:

    Description:


  • Thinner 71

    Features:

    Description:


  • Thinner 76

    Features:

    Description:


  • Thinner 80

    Features:

    Description:


  • Thinner 82

    Features:

    Description:


  • Thinner 85

    Features:

    Description:


  • Tool Cleaning Thinner

    Features:

    Description: